| Customization: | Available |
|---|---|
| After-sales Service: | 3 Years |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The model is suitable for car parks and many roads from small private access roads to urban streets. Ellins' IOT is based on advanced wireless communication technology and adopts a unifiedcloud platform for efficient management. Without changing the structure of the lamp or addingwiring, it can realize remote switching, dimming, monitoring and circuit control of a single lamp.and support longitude and latitude scheduled control, every other lamp lights on, etc. In addition.dimming can be realized based on pedestrian 35 flow, so as to achieve energy saving,environmental protection intelligent control.
Features:
* Using Moving Track MPPT maximum power tracking technology, higher tracking efficiency and faster speed;
* Both lead-acid battery and lithium battery are applicable, operating parameters can beset by remote control;
* Using Ultra Green power control technology with extremely low power consumption and sleep current;
* Lead-acid battery multi-stage constant voltage charging with temperature compensation;
* 10-period programmable load power/time control;
* Battery charge and discharge high and low temperature protection, with operating temperature settable;
* A variety of intelligent power modes are available for choice, with load power adjustableautomatically according to the battery level;
* High precision digital step-up constant current control algorithm, ensuring high efficiencyand high constant current accuracy;
* Infrared wireless communication, allowing for setting/reading parameters, reading status etc;
* Multiple protections such as battery/PV reverse polarity protection, LED short-circuit/open-circuit/limited power protection, etc;
* Extensible to loT remote communication monitoring function;
* Full aluminum housing, IP67 waterproof rating, applicable to a variety of harsh environments.
| Model | ELS-ST3B | ||||
| Power | 50W | 80W | 100W | 120W | 150W |
| LED QTY | 180pcs | 180pcs | 240pcs | 240pcs | 300pcs |
|
Solar Panel
|
18V Mono Crystalline 70W
|
18V Mono Crystalline 80W
|
18V Mono Crystalline 100W
|
18V Mono Crystalline 100W
|
18V Mono Crystalline 120W
|
| Fixture Size |
887*400*280mm
|
887*400*280mm
|
1160*400*280mm
|
1160*400*280mm
|
1435*400*280mm
|
| Voltage | 12/24V | ||||
| Material | Die casting aluminum housing +PC lens+ Temprered glass | ||||
| LED | CREE/Bridegelux LED | ||||
| Lumen | >170lm/w | ||||
| Solar panel | 25 years lifetime | ||||
| working temperature | -25ºC~+65ºC | ||||
| Beam angel | 140*70° | ||||
| Warranty | 3 years | ||||
| Solar Charging Time |
4 hours in bright sunlight
|
||||
|
Installation pole
|
Φ60~75mm
|
||||
| 1.When installing lights, please take it lightly and gently, and it is strictly forbidden to colide or knock toavoid damage. 2.There should be no tall buildings or trees in front of the solar panels to shield the sunlight, and choose toinstall without cover. 3.All the screws for installing the lamps need to be tightened and screwed tightly, and there should be noloosening. 4.Since the lighting time and power are set according to the factory specifications,if need specialightingmode should be notified before placing the order. 5.When repairing or replacing the led chip, lithium battery, controller,type and power must be the same asour original,lt is strictly forbidden to replace the light source with different power models from any othermanufacture. 6.When replacing internal parts, wiring must be strictly in accordance with the corresponding wiring diagram. The positive and negative poles are dlearly separated, and reverse connection is strictly prohibited. |
Shipping
){kind=link}